Ready-mix adhesive especially developed for all kinds of contract wall coverings, hotels and offices

SUITABLE FOR:. Vinyl contract wall coverings with fabric or non-woven support. Fiberglass wall coverings. Vinyl wallcoverings with height from 100 cm to 160 cm. Heavy and rigid wall coverings

TECHNICAL FEATURES:. Exceptional adhesive strength. Does not stain. High Coverage . Very Low V.O.C. (Volatile Organic Compounds).

SURFACE PREPARATION: All surfaces must be dry, absorbent, strong, free of dust or paints or oils. We always recommend the use of our PRIMER AC fixative for consolidation and cleaning. We recommend using our PRIMER SP (specific for wet walls with fungi and mold) in case of rising damp or too humid surface. PRODUCT PREPARATION: Product is a ready-to-use product however when necessary, dilute it with clean water up to a maximum of 5/10%.

COVERAGE: 150 -250 gr/m2, depending on the porosity of the substrate.

CLEANING: We recommend cleaning the wall coverings from excess adhesive and the joints with a wet sponge. Possible spillages of the adhesive should be removed immediately. We also recommend consulting the cleaning instructions of the wall coverings manufacturer before application. THE PRODUCT DOES NOT STAIN. TEXRECO CONTRACT SUPER STRONG is not suitable on imperfect prepared substrates or humid walls. We suggest, in case of humid wall, to prepare the surface with ACM PRIMER SP.

Product Technical Data Sheet