NOTE: Must be purchased in lots of 4.

Mono-Component protector developed for use with all types of wall coverings. It allows the wallcovering to be washed, and provides a superior scratch resistance. It is suitable for both domestic and trade use.

SUITABLE FOR:. Wallpapers, Glass fibre wallcoverings, Non-woven wallcovering. Textured vinyl wallcovering. Vinyl or digitally printed non-woven wallcovering.

TECHNICAL FEATURES:. Opaque. Pleasant aesthetic finish. Does not affect the colour of the wallcovering. Does not leave marks. Does not yellow. Solvent free.

PRODUCT PREPARATION: EASY PROTECT is a ready to use mono-component protector.

SURFACE PREPARATION: All surfaces must be dry, absorbent, solid, free from dust, paints and oils. We also recommend using a sealing primer to bind and clean the wall. PRIMER AC is ideal for binding and cleaning, where as PRIMER SP is specifically developed to protect and prevent walls from mould and bacteria where the environment may be humid.

CLEANING: Clean the equipment with fresh water immediately after use. 

EASY PROTECT is a ready to use mono-component protector, mix before use to eliminate any sedimentation. Apply the product directly to the wallcovering with a sponge roller, making one or two coats. Wait at least 1 hour between coats for the surface to become completley dry. Do not use in areas in direct contact with water.

COVERAGE: For glass fibre and for textured vinyl: approx 7-8 m2. For non-woven, paper and vinyl: 11-12 m2

Product Document